manualshive.com logo in svg

HP EliteOne 1000 G1, Руководство по обслуживанию и ремонту

Поделиться
Скачать
HP EliteOne 1000 G1 Скачать руководство пользователя страница 66

Table 5-3

  Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

Allows you to set amount of time for a operating system and BIOS watchdog alert to be sent if the timers 
are not deactivated. BIOS watchdog is deactivated by BIOS and would indicate that a halt occurred during 
execution if the alert is sent to the management console. An operating system alert is deactivated by the 
operating system image and would indicate that a hang occurred during its initialization.

●

OS Watchdog Timer (min.) – (5/10/15/20/25). Default is 5 min.

●

BIOS Watchdog Timer (min.) – (5/10/15/20/25). Default is 5 min.

CIRA Timeout (min.) (1/2/3/4/Never)

CIRA is Customer Initiated Remote Assistance, an Intel service to help users employing Active 
Management Technology (AMT).

Recovering the configuration settings

This method of recovery requires that you first perform the Save to Removable Media command with the 
Computer Setup (F10) Utility before Restore is needed. (See 

Computer Setup–Main on page 47

 in the 

Computer Setup—File table.)

The Save to Removable Media option creates a file named HPSETUP.TXT on an inserted USB flash media 
device. This file can be edited to change the settings on Restore. An asterisk (*) marks the selected option for 
a setting.

NOTE:

It is recommended that you save any modified computer configuration settings to a USB flash media 

device and save the device for possible future use.

To restore the configuration, insert the USB flash media device with the saved configuration and perform the 
Restore from Removable Media command with the Computer Setup (F10) Utility. (See 

Computer Setup–Main 

on page 47

 in the Computer Setup—File table.)

58

Chapter 5   Computer Setup (F10) Utility

Содержание EliteOne 1000 G1



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды