HP EliteOne 1000 G1 Скачать руководство пользователя | Manualshive

Страница: 63 / 114

background image

Table 5-3

Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

M.2 WLAN/BT

Lets you disable the wireless module slot. Default is enabled.

Allow PCIe/PCI SERR# Interrupt (enable/disable)

Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity
errors, and critical errors other than parity. Default is enabled.

Power Button Override (disable/4 sec/15 sec)

Lets you disable or enable and select the number of seconds you have to hold down the power button for
it to force the system to power off. Default is ‘4 sec’.

Built-In Device Options

Embedded LAN Controller

Select to show the device in the operating system. Default is enabled.

Wake On LAN

Lets you either disable the Wake On LAN feature, or configure where the computer boots, including the
network or hard drive. Default is Boot to Network.

Allow No Panel configuration

When enabled, POST blink and beep codes and error messages are not generated. Default is disabled.

Video memory size

Use this option to manage graphics memory allocation. The value you choose is allocated permanently to
graphics and is unavailable to the operating system.

Integrated Camera

Clear to disable the integrated camera. Default is enabled.

Audio Device

Select to show the device in the operating system. Default is enabled.

Integrated Microphone

Clear to disable the integrated microphone. This does not affect devices plugged into audio jacks. Default
is enabled.

Internal Speakers (does not affect external speakers)

Clear to disable the chassis speaker or speakers. This function is applicable to normal audio playback in
the operating system and does not affect the error or warning beeps during POST. Default is enabled.

Headphone Output

Clear to disable the headphone jack. Default is enabled.

Collaboration Buttons

Clear to disable the collaboration buttons. Default is enabled.

Button Sensitivity

Select from low, medium, or high. Default is low.

LAN/WLAN auto switching

Select to enable auto switching between a wired and wireless connection. Default is disabled.

Wake on WLAN

Select to enable wake on WLAN. Default is disabled.

M.2 USB/Bluetooth

Computer Setup (F10) Utilities

55

«
...
61
62
63
64
65
...
»

Содержание EliteOne 1000 G1



















































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteOne 1000 G1

Бренд: Acer Страницы: 26

Бренд: Acer Страницы: 2

Бренд: Acer Страницы: 2

Бренд: Wacom Страницы: 26

Бренд: Datavideo Страницы: 14

Бренд: iGPSPORT Страницы: 5

Бренд: iHealth Страницы: 92

Бренд: Panasonic Страницы: 41

Бренд: Garmin Страницы: 6

Cintiq Pro DTH-3220

Бренд: Wacom Страницы: 78

Бренд: Hanns.G Страницы: 21

Laser LT RD-1550

Бренд: C&S Controls Страницы: 44

Бренд: Barco Страницы: 71

Бренд: BenQ Страницы: 36

Бренд: A&A Tech Страницы: 16

Бренд: WINGTOP Страницы: 33

Бренд: Graco Страницы: 32

Бренд: ViewSonic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды