manualshive.com logo in svg

HP EliteDesk 705 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G4 Скачать руководство пользователя страница 63

5.

Connect the power cable (1) and data cable (2) to the rear of the hard drive.

NOTE:

If the 2.5-inch hard drive is the primary drive, connect the other end of the data cable to the 

dark-blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the 
other end of the data cable to one of the light-blue SATA connectors on the system board.

6.

Reassemble the computer.

Removing and installing an M.2 SSD storage card

NOTE:

There is one M.2 SSD socket on the system board. The computer supports 2230 and 2280 M.2 SSD 

cards.

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 17

)

2.

Remove the access panel (

Access panel on page 18

)

3.

Remove the front bezel (

Front bezel on page 19

).

4.

Remove the drive cage (

Drive cage on page 32

).

Drives

53

Содержание EliteDesk 705 G4


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды