manualshive.com logo in svg

HP EliteDesk 705 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G4 Скачать руководство пользователя страница 140

C

Linux technical notes

HP offers a variety of Linux solutions for HP workstation customers:

●

HP supports Ubuntu on some HP workstations.

●

HP supports Red Hat Enterprise Linux (RHEL) on HP workstations.

●

HP certifies and supports SUSE Linux Enterprise Desktop (SLED) on HP workstations.

For Linux setup and restore procedures, see the user guide for your workstation at 

http://www.hp.com/

support/ workstation_manuals

.

●

System RAM on page 130

●

Audio on page 131

●

Hyper-Threading Technology on page 131

●

NVIDIA graphics workstations on page 132

NOTE:

After you set up the operating system, make sure that the latest BIOS, drivers, and software updates 

are installed.

CAUTION:

Do not add optional hardware or third-party devices to the workstation until the operating 

system is successfully installed. Adding hardware might cause errors and prevent the operating system from 
installing correctly.

System RAM

HP supports different amounts of total RAM in various HP workstations, based on the number of hardware 
DIMM slots and the capabilities of the system. The total memory supported for each configuration is listed in 
the Hardware Support Matrix for HP Linux Workstations at 

http://www.hp.com/support/

linux_hardware_matrix

.

130 Appendix C   Linux technical notes

Содержание EliteDesk 705 G4


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды