manualshive.com logo in svg

HP EliteDesk 705 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G4 Скачать руководство пользователя страница 142

NVIDIA graphics workstations

Some workstation configurations come with NVIDIA Quadro graphics hardware. HP recommends the use of 
NVIDIA drivers for best results on Linux systems.

HP provides recommended versions of the drivers with RPM-compatible installers for RHEL and SLED 
distributions. These are available from the HP Installer Kit for Linux and from workstation driver repositories 
on hp.com. When HP installers are used, their contents and documentation links are located in the /opt/hp/
nvidia folder.

When installing Linux on a workstation that contains an NVIDIA card, administrators should select a VESA-
compatible driver to avoid the instability that is experienced with some open-source versions of the Nouveau 
and DRM drivers.

Open-source versions of Nouveau drivers and NVIDIA drivers cannot coexist in the same runtime environment 
because they use the same hardware resources. If administrators create their own Linux environments using 
NVIDIA drivers but choose not to use HP-packaged versions, HP recommends that they manually append the 
following boot loader parameters to properly suppress the Nouveau driver at runtime (grub example below):

kernel /vmlinuz ... rdblacklist=nouveau nouveau.modeset=0

This action is applied by HP installers but must be applied/restored under other circumstances.

To customize display characteristics and resolutions when the computer is using an NVIDIA driver, execute the 
following command:

/usr/bin/nvidia-settings

To create and manipulate the /etc/X11/xorg.conf file, execute:

/usr/bin/nvidia-xconfig

132 Appendix C   Linux technical notes

Содержание EliteDesk 705 G4


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды