manualshive.com logo in svg

HP EliteDesk 705 G4, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteDesk 705 G4 Скачать руководство пользователя страница 56

4.

Pull the release lever next to the rear of the hard drive outward (1). While pulling the release lever out, 
lift the rear of the drive up (2), and then slide the front of the drive back and lift it out of the bay (3).

●

To remove a 2.5-inch hard drive installed in an adapter bracket, pull the release lever next to the 
rear of the bracket outward (1). While pulling the release lever out, lift the rear of the bracket up 
(2), and then slide the front of the bracket back and lift it out of the bay (3).

Installing a 3.5-inch hard drive

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 17

)

2.

Remove the access panel (

Access panel on page 18

)

3.

Install mounting screws on the sides of the hard drive using standard 6-32 silver-and-blue mounting 
screws.

46

Chapter 4   Removal and replacement procedures

Содержание EliteDesk 705 G4


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды