HP EliteBook 835 G7, Руководство по техническому обслуживанию и ремонту

Страница: 50 / 108

4. If the WWAN antenna is not connected to the terminal on the WWAN module, a protective sleeve must be
installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WWAN module.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-5 Solid-state drive descriptions and part numbers
Description Spare part number
1 TB, PCIe, TLC L85348-002
512 GB, PCIe, TLC L85360-002
512 GB, PCIe, TLC, self-encrypting drive (SED) L85368-002
512 GB, PCIe, value L85364-002
256 GB, PCIe, TLC L85350-002
256 GB, PCIe, TLC, self-encrypting drive (SED) M07245-002
256 GB, PCIe, value L85354-002
128 GB, SATA-3, TLC L85346-002
Solid-state drive cover (included in Bracket Kit) M08556-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly ( Preparation for disassembly on page 33 ).
2. Remove the bottom cover ( Bottom cover on page 33 ).
3. Disconnect the battery cable from the system board (see Battery on page 43 ).
Remove the solid-state drive:
40 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts