HP Elite x2 1012 G2, Руководство по техническому обслуживанию и ремонту

Страница: 51 / 90

Reverse this procedure to replace the webcam and the rear webcam.
Microphone board
Description Spare part number
Microphone board 924449-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal and
replacement.
Before removing the webcam, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Kickstand (select products only) (see Kickstand on page 26 )
b. Back cover (see Back cover on page 29 )
c. Display panel (see Display panel on page 30 )
d. Battery (see Battery on page 32 )
e. Hall sensor board (see Hall sensor board on page 34 )
f. Kickstand hinges (see Kickstand hinges on page 35 )
g. Solid-state drive (see Solid-state drive on page 36 )
h. WLAN module (see WLAN module on page 38 )
Component replacement procedures 43