Display panel
Display panel
LCD 12.3 WQXGA+BrightView UWVA with bezel, infrared camera, and touch screen
924438-001
LCD 12.BrightView UWVA with bezel and touch screen
925556-001
LCD cable kit
924453-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal and
replacement.
Before removing the display panel, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the following components:
a.
Kickstand (see
).
b.
Back cover (see
)
Remove the display panel:
1.
Use a suction tool to loosen all 4 corners of the display panel (1), and then lift the panel carefully to
remove it (2).
30
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
