HP ELITE x2 1012 G1 Скачать руководство пользователя | Manualshive

Страница: 76 / 96

background image

NOTE:

If you connect your tablet to a network, consult the network administrator before installing any

software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download
is complete. If no instructions are revealed, follow these steps:

1.

Type

file

in the taskbar search box, and then select File Explorer.

2.

Select your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder that contains the update.

4.

Open the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Changing the boot order using the f9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:

1.

Access the Boot Device Options menu:

●

Tablets with keyboards:

▲

Turn on or restart the tablet, and when the HP logo appears, press

f9

to enter the Boot Device

Options menu.

●

Tablets without keyboards:

▲

Turn off the tablet. Press the power button in combination with the volume down button until
the Startup menu is displayed, and then tap F9 to enter the Boot Device Options menu.

2.

Select a boot device, then press

enter

.

TPM BIOS settings (select products only)

IMPORTANT:

Before enabling Trusted Platform Module (TPM) functionality on this system, you must ensure

that your intended use of TPM complies with relevant local laws, regulations and policies, and approvals or
licenses must be obtained if applicable. For any compliance issues arising from your operation/usage of TPM
which violates the above mentioned requirement, you shall bear all the liabilities wholly and solely. HP will
not be responsible for any related liabilities.

TPM provides additional security. You can modify the TPM settings in Computer Setup (BIOS).

NOTE:

If you change the TPM setting to Hidden, TPM is not visible in the operating system.

To access TPM settings in Computer Setup:

1.

Start Computer Setup. See

Starting Computer Setup on page 65

.

2.

Select Security, select TPM Embedded Security, and then follow the on-screen instructions.

68

Chapter 7 Computer Setup (BIOS), TPM, and HP Sure Start

«
...
74
75
76
77
78
...
»

Содержание ELITE x2 1012 G1

































































































Отзывы:

Нет отзывов

Похожие инструкции для ELITE x2 1012 G1

Бренд: Garrard Страницы: 33

Бренд: Magnavox Страницы: 18

Бренд: i-box Страницы: 27

Бренд: Acecad Страницы: 19

Бренд: LENCO Страницы: 78

A7 Internet Tablet

Бренд: Elocity Страницы: 28

Бренд: Technics Страницы: 20

Бренд: Goclever Страницы: 32

Бренд: U-Turn Страницы: 8

Бренд: HP Страницы: 7

Pro Tablet 608 G1

Бренд: HP Страницы: 56

Бренд: HP Страницы: 19

Бренд: HP Страницы: 4

Бренд: HP Страницы: 42

Pro Tablet 408 G1

Бренд: HP Страницы: 50

Stream 8 Tablet

Бренд: HP Страницы: 40

Бренд: HP Страницы: 50

Pro Tablet 608 G1

Бренд: HP Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды