manualshive.com logo in svg

HP ELITE x2 1012 G1, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ELITE x2 1012 G1 Скачать руководство пользователя страница 73

7

Computer Setup (BIOS), TPM, and HP Sure 
Start

Using Computer Setup

Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and 
output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup 
includes settings for the types of devices installed, the startup sequence, and the amount of system and 
extended memory.

NOTE:

Use extreme care when making changes in Computer Setup. Errors can prevent the system from 

operating properly.

Starting Computer Setup

NOTE:

An external keyboard or mouse connected to a USB port can be used with Computer Setup only if USB 

legacy support is enabled.

To start Computer Setup, follow these steps:

▲

Start Computer Setup.

●

Tablets with keyboards:

▲

Turn on or restart the tablet, and when the HP logo appears, press 

f10

 to enter Computer 

Setup.

●

Tablets without keyboards:

▲

Turn off the tablet. Press the power button in combination with the volume down button until 
the Startup menu is displayed, and then tap F10 to enter Computer Setup.

Navigating and selecting in Computer Setup

●

To select a menu or a menu item, use the 

tab

 key and the keyboard arrow keys and then press 

enter

, or 

use a pointing device to select the item.

NOTE:

On tablets without keyboards, you can use your finger to make selections.

●

To scroll up and down, select the up arrow or the down arrow in the upper-right corner of the screen, or 
use the up arrow key or the down arrow key on the keyboard.

●

To close open dialog boxes and return to the main Computer Setup screen, press 

esc

, and then follow 

the on-screen instructions.

Using Computer Setup

65

Содержание ELITE x2 1012 G1

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды