HP ELITE x2 1012 G1 страница 14 Скачать руководство пользователя | Manualshive

Страница: 14 / 96

background image

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the

volume before using headphones, earbuds, or a headset. For
additional safety information, see the Regulatory, Safety and
Environmental Notices.

To access this guide:

▲

Select the Start button, select All apps, select HP Help and
Support, and then select HP Documentation.

NOTE:

When a device is connected to the jack, the tablet

speakers are disabled.

(4)

USB 3.0 charging (powered) port

Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub. Standard USB ports
will not charge all USB devices or will charge using a low current.
Some USB devices require power and require you to use a
powered port.

NOTE:

USB charging ports can also charge select models of

cell phones and MP3 players, even when the tablet is off.

(5)

MicroSD card reader

Reads microSD cards that store, manage, share, or access
information.

(6)

USB Type-C (Thunderbolt-enabled) port

Connects an AC adapter and connects any USB device with a
Type-C connector. Your tablet may also support a Thunderbolt
docking station.

NOTE:

Some USB Type-C ports can charge select models of cell

phones, laptops, tablets, and MP3 players, even when the tablet
is off. Some can also connect DisplayPort, VGA, HDMI,
Thunderbolt, and other video devices.

NOTE:

Adapters (purchased separately) may be required.

(7)

AC adapter and battery light

●

White: The AC adapter is connected and the battery is fully
charged.

●

Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is
charging.

●

Off: The battery is not charging from this port.

(8)

Alignment post connectors (2)

Align and attach the tablet to the optional keyboard.

(9)

ZIF (Zero Insertion Force) expansion slot

Allows you to connect accessories such as a keyboard or power
supply using the POGO pin connector.

(10)

Pen loop slots

Allow you to connect the pen to the tablet using the pen loop.

(11)

Security cable slot

Attaches an optional security cable to the tablet.

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the tablet from being mishandled or stolen.

(12)

Micro SIM card slot (select products only)

Supports a wireless subscriber identity module (SIM) card.

(13)

Volume button

Press to increase or decrease sound.

(14)

Power button

●

When the tablet is off, press the button to turn on the
tablet.

●

When the tablet is on, press the button briefly to initiate
Sleep.

6

Chapter 2 External component identification

«
...
12
13
14
15
16
...
»

Содержание ELITE x2 1012 G1

































































































Отзывы:

Нет отзывов

Похожие инструкции для ELITE x2 1012 G1

Бренд: Wacom Страницы: 15

Бренд: Wacom Страницы: 88

Бренд: Xoro Страницы: 2

Joystick for Ipad

Бренд: Logitech Страницы: 2

Бренд: Winmate Страницы: 48

Бренд: C Spire Wireless Страницы: 43

Бренд: Acoustic Signature Страницы: 12

Kyros MID7046 Series

Бренд: Coby Страницы: 119

Бренд: Arbor Technology Страницы: 60

Бренд: Wisky Страницы: 9

Бренд: Audio Technica Страницы: 232

Бренд: Goldring Страницы: 2

Бренд: Venstar Страницы: 6

Бренд: Venstar Страницы: 6

Бренд: Venstar Страницы: 8

Premium CR 1168

Бренд: camry Страницы: 80

Бренд: iMotion Страницы: 55

Бренд: Autel Страницы: 89

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды