HP Elite Slice G2 Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 115

background image

Table 5-3

Computer Setup—Advanced (for advanced users) (continued)

Option

Heading

To boot one time from a device other than the default device specified in Boot Order, restart the computer
and press

Esc

(to access the Startup menu) and then

F9

(Boot Menu), or only

F9

(skipping the Startup

menu) when the monitor light turns green. After POST is completed, a list of bootable devices is displayed.
Use the arrow keys to select the preferred bootable device and press

Enter

. The computer then boots

from the selected non-default device for this one time.

Secure Boot
Configuration

Configure Legacy Support and Secure Boot

Legacy Support – Lets you turn off all legacy support on the computer, including booting to DOS, running
legacy graphics cards, booting to legacy devices, and so on.

Secure Boot – Lets you make sure an operating system is legitimate before booting to it, making Windows
resistant to malicious modification from preboot to full OS booting, preventing firmware attacks. UEFI and
Windows Secure Boot only allow code signed by pre-approved digital certificates to run during the
firmware and OS boot process.

Default is ‘Legacy Support Disable and Secure Boot Enable’.

Secure Boot Key Management

Lets you manage the custom key settings.

Import Custom Secure Boot Keys

Lets you import custom boot keys. Clearing keys will disable secure boot. Default is disabled.

Clear Secure Boot Keys

Lets you delete any previously loaded custom boot keys. Clearing keys will disable secure boot. Default is
disabled.

Reset Secure Boot keys to factory defaults

Default is disabled.

Enable MS UEFI CA key

Disabling this setting alters the Secure Boot key list to further restrict the allowed software
components. Set this option to ‘disable’ to support Device Guard.

System Options

Turbo-boost (enable/disable)

Lets you enable Intel Turbo Boost technology. Default is enabled.

Hyperthreading (enable/disable)

Lets you control Intel processor capability that allows the processor to execute multiple threads
simultaneously.. Default is enabled.

Multi-processor (enable/disable)

Lets you control multiprocessor capability. Default is enabled.

Virtualization Technology (VTx) (Intel only)

Controls the virtualization features of the processor. Changing this setting requires turning the computer
off and then back on. Default is disabled.

Virtualization Technology for Directed I/O (VTd) (Intel only)

Controls virtualization DMA remapping features of the chipset. Changing this setting requires turning the
computer off and then back on. Default is disabled.

M.2 WLAN/BT (enable/disable)

Lets you disable the wireless module.

M.2 SSD (enable/disable)

54

Chapter 5 Computer Setup (F10) Utility

«
...
60
61
62
63
64
...
»

Содержание Elite Slice G2




















































































































Отзывы:

Нет отзывов

Похожие инструкции для Elite Slice G2

Бренд: National Instruments Страницы: 93

Бренд: IBM Страницы: 78

Бренд: IBM Страницы: 76

Бренд: IBM Страницы: 72

Бренд: IBM Страницы: 66

Бренд: IBM Страницы: 70

Бренд: IBM Страницы: 56

Бренд: IBM Страницы: 72

Бренд: IBM Страницы: 78

Бренд: IBM Страницы: 52

Бренд: IBM Страницы: 118

Бренд: IBM Страницы: 114

Бренд: IBM Страницы: 46

Бренд: IBM Страницы: 116

Бренд: IBM Страницы: 118

Бренд: IBM Страницы: 90

Бренд: IBM Страницы: 86

Бренд: IBM Страницы: 88

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды