HP Elite Slice G2 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 115

background image

Computer Setup—Advanced

NOTE:

Support for specific Computer Setup options may vary depending on the hardware configuration.

Table 5-3

Computer Setup—Advanced (for advanced users)

Option

Heading

Display Language

Lets you select the language of the menus in F10 Setup and the keyboard layout.

Scheduled Power-On

This feature wakes the system up from a powered off state at a specified date and time.

Boot Options

Select the devices that the computer can boot from, as well as other options, including:

●

Startup Menu Delay(sec). Enabling this feature will add a user-specified delay to the POST process.
One purpose for the delay is to provide additional time to activate hotkeys such as

Esc

for the

Startup Menu or

F10

for Computer Setup.

●

Fast Boot. Default is enabled.

●

USB Storage Boot. The optical drive module is considered a USB storage device. Default is enabled.

●

Network (PXE) Boot. Default is enabled.

●

NetClone BIOS Boot. Default is disabled.

●

After Power Loss. Default is Power Off.

■

Power off—causes the computer to remain powered off when power is restored.

■

Power on—causes the computer to power on automatically as soon as power is restored.

■

Previous state—causes the computer to power on automatically as soon as power is restored,
if it was on when power was lost.

NOTE:

If the system is configured to ‘Power On from Keyboard Ports’ (see Power Management

Options), then this setting is forced to ‘Power On’.

●

Prompt on Memory Size Change. Default is enabled.

●

Prompt on Fixed Storage Change. Default is disabled.

●

Audio Alerts During Boot. Default is enabled. When disabled, most audible beeps from errors,
warnings, and password prompts during boot up are suppressed.

●

UEFI Boot Order.

Default is enabled. Specify the order in which UEFI boot sources (such as a internal hard drive, USB
hard drive, USB optical drive, or internal optical drive) are checked for a bootable operating system
image.

UEFI boot sources always have precedence over legacy boot sources.

NOTE:

If more than one optical drive is present, the system boots from the first bootable optical

drive found (assuming CD-ROM is the first valid boot device in the boot order).

●

Legacy Boot Order

Specify the order in which legacy boot sources (such as a network interface card, internal hard drive,
USB optical drive, or internal optical drive) are checked for a bootable operating system image.

Specify the order of attached hard drives. The first hard drive in the order will have priority in the
boot sequence and will be recognized as drive C (if any devices are attached).

NOTE:

To drag a device to a preferred place, press

Enter

.

NOTE:

MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has

started.

Shortcut to Temporarily Override Boot Order

Computer Setup (F10) Utilities

53

«
...
59
60
61
62
63
...
»

Содержание Elite Slice G2




















































































































Отзывы:

Нет отзывов

Похожие инструкции для Elite Slice G2

Бренд: Raven Страницы: 34

Бренд: Raven Страницы: 8

Бренд: IBM Страницы: 212

9228 - IntelliStation Z - Pro

Бренд: IBM Страницы: 72

9114-275 - IntelliStation POWER 275

Бренд: IBM Страницы: 102

8863 - eServer xSeries 366

Бренд: IBM Страницы: 94

Бренд: IBM Страницы: 4

Бренд: IBM Страницы: 84

Бренд: IBM Страницы: 96

Бренд: IBM Страницы: 156

Бренд: IBM Страницы: 178

Бренд: IBM Страницы: 155

Бренд: IBM Страницы: 214

Бренд: IBM Страницы: 158

Бренд: Baaske Medical Страницы: 40

Бренд: Cartft Страницы: 10

Бренд: Aaeon Страницы: 43

Бренд: Lenze Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды