HP Elite Slice G2 Скачать руководство пользователя страница 29

Страница: 29 / 115

Removal and replacement procedures – HP
Elite Slice Base Module

Adherence to the procedures and precautions described in this chapter is essential for proper service. After
completing all necessary removal and replacement procedures, run the Diagnostics utility to verify that all
components operate properly.

NOTE:

Not all features listed in this guide are available on all computers.

NOTE:

HP continually improves and changes product parts. For complete and current information on

supported parts for your computer, go to

http://partsurfer.hp.com

, select your country or region, and then

follow the on-screen instructions.

Access panel

The Elite Slice G2 access panel must be removed to access internal components (see

Removing modules

on page 8

Remove the Elite Slice G2 from any additional modules.

Place the computer upside down on a flat surface covered with a soft cloth to protect the computer from
scratches or other damage.

Loosen the four captive screws securing the access panel, and lift the panel off the computer.

To replace the access panel, reverse the removal procedures.

Access panel

Содержание Elite Slice G2




















































































































Результаты поиска

Содержание Elite Slice G2

Отзывы:

Похожие инструкции для Elite Slice G2

Бренды по названию

Популярные бренды

HP Elite Slice G2, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Elite Slice G2

Отзывы:

Похожие инструкции для Elite Slice G2

Бренды по названию

Популярные бренды