HP Elite Slice G2, Руководство по техническому обслуживанию и ремонту

Страница: 49 / 115

System board
Removing the system board
NOTE: All system board spare part kits include replacement thermal material.
NOTE: System board appearance may vary.
To remove the system board:
1. Remove the access panel ( Access panel on page 21 ).
2. Remove the memory modules ( Memory on page 22 ).
3. Remove the Base Module ( Base Module on page 30 ).
4. Remove the WLAN module ( WLAN module on page 32 ).
5. Remove the fan sink ( Fan sink on page 37 ).
6. Remove the M.2 solid-state drive ( M.2 PCIe solid state drive (SSD) on page 38 ).
7. Remove the processor ( Processor on page 40 ).
8. Position the computer with the memory sockets facing upward.
9. Disconnect the speaker cable from the system board.
10. Position the computer with the processor socket facing upward.
System board 41