4.
Remove the speakers from the computer (4).
Reverse this procedure to install the speakers.
USB board
To remove the USB board, use this procedure and illustration.
Table 5-11
USB board description and part number
Description
Spare part number
USB board (models without WWAN)
M42276-001
USB board (models with WWAN)
M42277-001
USB board cable (available in the Cable Kit for models without WWAN)
M42293-001
USB board cable (available in the Cable Kit for models with WWAN)
M48385-001
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly on page 29
2.
Remove the bottom cover (
).
3.
Disconnect the battery cable from the system board (see
).
4.
Remove the heat sink and fan assembly (
Heat sink and fan assembly on page 36
5.
Remove the power button board (
Remove the USB board:
1.
Disconnect the large, flat cable from the ZIF connector on the USB board (2).
2.
Disconnect the touch cable from the connector on the USB board (2).
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Содержание Elite Dragonfly
Страница 4: ...iv Safety warning notice ...