HP eld Скачать руководство пользователя

Страница: 74 / 283

Binding of References

eld Manual—527255-009

3-20

Specifying Which Symbols to Export, and Creating

the Export Digest

the symbol. When the

-cross_dll_cleanup

option is specified, eld also verifies if a

symbol of the same name is found in a DLL. If it finds a same name, eld deems the

last copy of the procedure as "unused", and its code can be cleaned up. The

references to the symbol are therefore resolved to the copy of the symbol in the DLL.
When the

-cross_dll_cleanup

option is used, it is necessary that all the input

linkfiles be compiled with the

-Wglobalized

option (the same as when eld is

specified to build a globalized DLL, since this new option is a form of preemption).
To get maximum benefit from the

-cross_dll_cleanup

option, list the DLLs that are

directly used (on the eld command line), and also DLLs that previously were only

indirectly used.

Specifying Which Symbols to Export, and

Creating the Export Digest

When creating a loadfile the linker must determine which symbols to export. If no

options related to this are given in the linker’s command stream then its default

behavior is that it exports a symbol if it is a global symbol and the

STO_EXPORT

bit is

set in some ELF symbol table entry for the symbol in the linker’s input files. This is the

way the compiler or assembler tells the linker that certain symbols should be exported.

If the

STO_EXPORT

bit is set in any ELF symbol table entry for a symbol in the linker’s

input linkfiles, and the linker is creating a linkfile, then this bit is set in the linker’s output

file.
If the

-export_all

option is used then the linker exports all defined, global symbols

except for those in the following categories:

•

Procedures whose names begin with the special prefixes that mark them for

inclusion in the

ctor

dtor

init

z, or

termz

arrays.

•

Symbols that are specially known to the linker and have names that are

intended to only be meaningful within the loadfile being created. This includes

all the predefined symbols created by the linker, such as the symbols that are

the names of the

ctor

dtor

init

z, and

termz

arrays. However,

-export_all

does cause

_MCB

to be exported, if the linker has created that symbol.

The above rules can be overridden for specific symbols by name. If the -

exported_symbol option is specified then the symbol of the specified name is

unconditionally exported. If the -hidden_symbol option is specified then the symbol of

the specified name is unconditionally not exported. It is an error if the same symbol is

specified in both of these options. It is an error if the symbol specified in the

-exported_symbol option is not a global symbol that is defined in the loadfile being

created. It is a warning rather than an error if such a symbol is specified in the -

hidden_symbol option.
Note that globalized symbols are not treated specially with regard to these rules. That

means they are exported by default because they have the STO_EXPORT bit set, but

you can avoid exporting them by using the

-hidden_symbol

option.

Содержание eld




























































































































































































































































































Результаты поиска

Содержание eld

Отзывы:

Похожие инструкции для eld

Бренды по названию

Популярные бренды

HP eld, Руководство пользователя

Результаты поиска

Содержание eld

Отзывы:

Похожие инструкции для eld

Бренды по названию

Популярные бренды