HP eld Скачать руководство пользователя

Страница: 225 / 283

Output Listings and Error Handling

eld Manual—527255-009

6-115

Error Messages

Cause.

The private DLL registry that was specified for this link in the

-check_registry

-update_registry

option contained more than one

-range

command for the DLL that is being created by this link. Presumably, the

format of the file is bad because it was incorrectly edited by hand.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Fix the format of the file, as explained elsewhere in this manual.

Cause.

While reading the private DLL registry that was specified for this link in the

-check_registry

-update_registry

option,

eld

encounted an invalid

command on the line shown in the error message. Presumably, the format of the file is

bad because it was incorrectly edited by hand.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Fix the format of the file, as explained elsewhere in this manual. The two

possible commands are “

-dllarea

” and “

-range

”.

Cause.

The addresses listed for DLLs in a private DLL registry must be multiples of

64KB if the linker is not building an implicit DLL, or 128KB if the linker is building an

implicit DLL (i.e., a component of system library). However, that rule was violated by

the

-range

command on the indicated line number of the file. That could be because

the file was incorrectly edited by hand. Or, if the address is a multiple of 64K, but

needed to be a multiple of 128K, that could be because this private DLL registry was

previously used to build a DLL that wasn’t an implicit DLL, but now is being used to

build an implicit DLL.

Effect.

Fatal error (

eld

immediately stops without creating an output file).

Recovery.

Fix the format of the file so that the address is on the proper boundary. A

private DLL registry that is used to build ordinary DLLs should not also be used to build

implicit DLLs.

1615 DLL registry, line <number>: the new DLL is listed
multiple times in the registry.

1616 DLL registry, line <number>: unrecognized command in the
registry file.

1617 DLL registry, line <number>: DLL address is not a
mulitiple of the page size.

1618 DLL registry, line <number>: DLL size is not a multiple
of the page size.

Содержание eld




























































































































































































































































































Результаты поиска

Содержание eld

Отзывы:

Похожие инструкции для eld

Бренды по названию

Популярные бренды

HP eld, Руководство пользователя

Результаты поиска

Содержание eld

Отзывы:

Похожие инструкции для eld

Бренды по названию

Популярные бренды