HP DMX 400 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 118

HP DMX 400 Скачать руководство пользователя страница 2

HP PCL-4, and HP Laser Jet II are Trademarks of Hewlett Packard Corporation.
CG Triumvirate is a trademark of Agfa Corporation.
CG Times, based upon Times New Roman under license from The Monotype

Corporation.

plc, is a product of Agfa Corporation.
DMX, SEAQ, and PC Batch are trademarks of Datamax Barcode Products

Corporation.

As an Energy Star Partner, Datamax Corporation has determined that this product

meets the Energy Star guidelines for energy efficiency.

Firmware (Software) Agreement:

The enclosed Firmware (Software) resident

in the EPROM’s is owned by Licensor or its suppliers and is licensed for used
only on a single printer in the user’s Trade or Business.

The User agrees not

to, and not to authorize or permit any other person or party to, duplicate
or copy the EPROM’s or the information contained in the EPROM’s.

The firmware (Software) is protected by applicable copyright laws and
Licensor retains all rights not expressly granted. In no event will Licensor or
its suppliers be liable for any damages or loss, including direct, incidental,
economic, special, or consequential damages, arising out of the use or
inability to use the Firmware (Software).

Information in this document is subject to change without notice and does not

represent a commitment on the part of Datamax Barcode Products
Corporation. No part of this manual may be reproduced or transmitted in any
form or by any means, for any purpose other than the purchaser's personal use,
without the expressed written permission of Datamax Corporation.

© Copyright 1997 by Datamax Corporation

7500 Flying Cloud Drive • Suite 655 • Eden Prairie, Minnesota 55344

(612) 946-0026

All rights reserved. Printed in the United States of America.

Part Number: 88-2190-01

Revision: A2

«
1
2
3
4
...
»

Содержание DMX 400























































































































Отзывы:

Нет отзывов