manualshive.com logo in svg

HP Deskpro 300, Справочник по аппаратуре

Поделиться
Скачать
HP Deskpro 300 Скачать руководство пользователя страница 53

E-2

    Electrostatic Discharge

Compaq Confidential - Need to Know Required

Writer: M. Church Part Number: 212399-001 File Name: j-appe.doc

Last Saved On: 08/04/00 11:05 AM Last Saved By: The Integrity Group

Grounding Methods

Several methods for grounding are available. Use one or more of the
following methods when handling or installing electrostatic-sensitive
parts:

■ 

Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible straps
with a minimum of 1 /-10 percent resistance in the
ground cords. To provide proper ground, wear the strap snug
against the skin.

■ 

Use heelstraps, toestraps, or bootstraps at standing workstations.
Wear the straps on both feet when standing on conductive floors or
dissipating floor mats.

■ 

Use conductive field service tools.

■ 

Use a portable field service kit with a folding static-dissipating
work mat.

If you do not have any of the suggested equipment for proper
grounding, contact your Compaq authorized dealer, reseller, or service
provider.

✎

For more information on static electricity, contact your
Compaq authorized dealer, reseller, or service provider.

Содержание Deskpro 300



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды