manualshive.com logo in svg

HP Deskpro 300, Справочник по аппаратуре

Поделиться
Скачать
HP Deskpro 300 Скачать руководство пользователя страница 16

Compaq Deskpro Workstation 300 Hardware Reference Guide    

1-11

Compaq Confidential - Need to Know Required

Writer: M. Church Part Number: 212399-001 File Name: d-ch1.doc

Last Saved On: 09/07/00 2:03 PM Last Saved By: Integrity Group

11. Remove the subpanel 

1

 as described in “Removing the Bezel

Blank” in Chapter 2, and reposition the subpanel 

2

 with the bezel

blank in the proper orientation for the minitower configuration.

CAUTION:

  Hold the subpanel straight when you pull it away from the

front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.

Changing from a desktop to a minitower configuration

✎

When converting from a desktop to a minitower orientation,
use the replacement subpanel that is shipped with your
workstation to ensure that the Compaq logo is properly
oriented.

12.  Replace the subpanel, front bezel, and workstation access panel.

Be sure that the subpanel and front bezel align properly with the
alignment tabs.

13.  Reconnect the power cord to the grounded AC outlet, then

reconnect the network cable and any external devices to the
system.

Содержание Deskpro 300



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды