manualshive.com logo in svg

HP Deskpro 300, Справочник по аппаратуре

Поделиться
Скачать
HP Deskpro 300 Скачать руководство пользователя страница 23

2-4

    Hardware Upgrades

Compaq Confidential - Need to Know Required

Writer: M. Church Part Number: 212399-001 File Name: e-ch02.doc

Last Saved On: 09/07/00 2:03 PM Last Saved By: Integrity Group

Removing the Front Bezel

To remove the front bezel:

1.  Shut down the operating system properly, then turn off the

workstation and any external devices.

2.  Disconnect the power cord from the grounded AC outlet.

3.  Remove the workstation access panel. See “Removing the

Workstation Access Panel” in this chapter.

4.  Push in on the two front bezel release tabs 

1

, then rotate the front

bezel 

2

 away from the chassis to release it.

Pressing the two front bezel release tabs to remove the front bezel

✎

When replacing the front bezel, ensure that the bottom hinge
points are properly placed in the chassis before rotating the
front bezel back into its original position.

Содержание Deskpro 300



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды