manualshive.com logo in svg

HP Deskpro 300, Справочник по аппаратуре

Поделиться
Скачать
HP Deskpro 300 Скачать руководство пользователя страница 31

2-12

    Hardware Upgrades

Compaq Confidential - Need to Know Required

Writer: M. Church Part Number: 212399-001 File Name: e-ch02.doc

Last Saved On: 09/07/00 2:03 PM Last Saved By: Integrity Group

✎

When replacing the subpanel, ensure that the aligning pins are
properly oriented.

When converting from a minitower to a desktop orientation,
use the replacement subpanel that is shipped with your
workstation to ensure that the Compaq logo is properly
oriented.

Installing a Drive

The following sections provide instructions for installing a hard drive
in a 3.5-inch drive bay and in a 5.25-inch drive bay.

Installing a Hard Drive into a 3.5-inch Drive Bay

✎

Compaq does not support mixing Ultra ATA and SCSI hard
drives in the same system. If you are replacing a hard drive in
bay 4 or bay 5, the replacement drive should be of the same
type as the drive being removed.

To install a hard drive in a 3.5-inch drive bay:

1.  Turn off the workstation and disconnect the power cord from the

grounded AC outlet.

2.  Remove the Workstation access panel. See “Removing the

Workstation Access Panel” in this chapter.

3.  Remove the front bezel. See “Removing the Front Bezel” in this

chapter.

Содержание Deskpro 300



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды