HP Designjet T620 Series Скачать руководство пользователя страница 67

Страница: 67 / 76

System BIOS

Updating or restoring a BIOS

HP Device Manager

HP Device Manager can be used to update the BIOS of a thin client. Customers can use a pre-built

BIOS add-on or can use the standard BIOS upgrade package along with an HP Device Manager File

and Registry template. For more information on HP Device Manager File and Registry templates, review

the

HP Device Manager User Guide

found at

www.hp.com/go/hpdm

Windows BIOS Flashing

You can use the BIOS Flash Update SoftPaq to restore or upgrade the system BIOS. Several methods

for changing the BIOS firmware stored on your computer are available.

The BIOS executable is a utility designed to flash the System BIOS within a Microsoft Windows

environment. To display the available options for this utility, launch the executable file under the

Microsoft Windows environment.

You can run the BIOS executable with or without the USB storage device. If the system does not have a

USB storage device installed, the BIOS update will perform under the Microsoft Windows environment

and followed by system reboot.

Linux BIOS Flashing

You can use the hp-flash utility and its associated driver to update the BIOS on systems running Linux.

After the driver loads, execute the utility from a command prompt with administrator privileges. The HP

ThinPro or HP Smart Client Linux OS images include the utility for updating the BIOS, but the binary file

to flash must be copied from the DOS Flash folder to the unit. Review the README.txt file for more

specific instructions in the SoftPaq. The Linux Flash folder also contains the files necessary to build the

BIOS flash driver module for the particular kernel being used; the hp-flash utility is not kernel-dependent

other than the choice of 32-bit (i686) and 64-bit (x86_64) flavors.

BitLocker Drive Encryption / BIOS Measurements

If you have Windows BitLocker Drive Encryption (BDE) enabled on your system, we recommend that

you temporarily suspend BDE before updating the BIOS. You should also obtain your BDE recovery

password or recovery PIN before suspending BDE. After the you flash the BIOS, you can resume BDE.

To make a change to BDE, select

Start > Control Panel > BitLocker Drive Encryption

, click

Suspend Protection

Resume Protection

and then click

Yes

Updating or restoring a BIOS

Содержание Designjet T620 Series













































































Результаты поиска

Содержание Designjet T620 Series

Отзывы:

Похожие инструкции для Designjet T620 Series

Бренды по названию

Популярные бренды

HP Designjet T620 Series, Руководство по устранению неисправностей

Результаты поиска

Содержание Designjet T620 Series

Отзывы:

Похожие инструкции для Designjet T620 Series

Бренды по названию

Популярные бренды