HP Designjet T620 Series Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 76

background image

Computer Setup—Power

NOTE:

Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table A-2

Computer Setup—Power

Option

Description

Hardware Power
Management

SATA Power Management – Enables or disables SATA bus and/or device power management.
Default is enabled.

S5 Maximum Power Savings – Turns off power to all nonessential hardware when system is off to
meet EUP Lot 6 requirement of less than 0.5 Watt power usage. Default is disabled.

S4/S5 Wake on LAN (Disable/Enable). Permits the user to control whether the system should wake
from S4 of S5 if a magic packet id received by NIC.

Thermal

CPU Fan speed (Read-Only), show the CPU fan speed in RPM on the t620 Flex system.

Computer Setup—Advanced

NOTE:

Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table A-3

Computer Setup—Advanced (for advanced users)

Option

Heading

Power-On Options

Allows you to set:

ł

POST messages (enable/disable). Default is disabled.

ł

After Power Loss (off/on/previous state). Default is Power off. Setting this option to:

Ń

Power off—causes the computer to remain powered off when power is restored.

Ń

Power on—causes the computer to power on automatically as soon as power is restored.

Ń

Previous state—causes the computer to power on automatically as soon as power is
restored, if it was on when power was lost.

NOTE:

If you turn off power to the computer using the switch on a power strip, you will not be

able to use the suspend/sleep feature or the Remote Management features.

ł

POST Delay (in seconds). Enabling this feature will add a user-specified delay to the POST
process. This delay is sometimes needed for hard disks on some PCI cards that spin up very
slowly, so slowly that they are not ready to boot by the time POST is finished. The POST delay
also gives you more time to select

F10

to enter Computer (F10) Setup. Default is None.

BIOS Power-On

Allows you to set the computer to turn on automatically at a time you specify.

Onboard Devices

Allows you to set resources for or disable Legacy devices.

38

Appendix A Computer Setup (F10) Utility, BIOS Settings

«
...
44
45
46
47
48
...
»

Содержание Designjet T620 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для Designjet T620 Series

BladeCenter HS23

Бренд: IBM Страницы: 36

Бренд: IBM Страницы: 214

Бренд: Rack Solutions Страницы: 8

Бренд: SafeNet Страницы: 109

totalstorage 200

Бренд: IBM Страницы: 180

EonServ 5000 Series

Бренд: Surveon Страницы: 33

Бренд: Xyplex Страницы: 58

Бренд: SmartSight Страницы: 113

Бренд: Inspur Страницы: 2

Proline Promass 500

Бренд: TechnipFMC Страницы: 32

Бренд: Supermicro Страницы: 96

Бренд: Supermicro Страницы: 130

Бренд: Supermicro Страницы: 124

Бренд: EVS Страницы: 87

Бренд: Planet Страницы: 93

Boot Optimized Server Storage-S1

Бренд: Dell EMC Страницы: 32

Бренд: Meinberg Страницы: 55

Бренд: Symetrix Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды