HP Designjet T620 Series Скачать руководство пользователя страница 12

Страница: 12 / 76

2 Hardware changes

Warnings and cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and

warnings in this guide.

WARNING!

To reduce the risk of personal injury or equipment damage from electric shock, hot

surfaces, or fire:

Disconnect the power cord from the power outlet and allow the internal system components to cool

before you touch them.

Do not plug telecommunications or telephone connectors into the network interface controller (NIC)

receptacles.

Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.

To reduce the risk of serious injury, read the

Safety & Comfort Guide

. It describes proper workstation,

setup, posture, and health and work habits for computer users, and provides important electrical and

mechanical safety information. The

Safety & Comfort Guide

is located on the HP website at

http://www.hp.com/ergo

WARNING!

Energized and moving parts inside.

Disconnect power to the equipment before removing the enclosure.

Replace and secure the enclosure before re-energizing the equipment.

CAUTION:

Static electricity can damage the electrical components of the computer or optional

equipment. Before beginning the following procedures, be sure that you are discharged of static

electricity by briefly touching a grounded metal object.

When the computer is plugged into an AC power source, voltage is always applied to the system

board. To prevent damage to internal components, you must disconnect the power cord from the power

source before opening the computer.

Chapter 2 Hardware changes

Содержание Designjet T620 Series













































































Результаты поиска

Содержание Designjet T620 Series

Отзывы:

Похожие инструкции для Designjet T620 Series

Бренды по названию

Популярные бренды

HP Designjet T620 Series, Руководство по устранению неисправностей

Результаты поиска

Содержание Designjet T620 Series

Отзывы:

Похожие инструкции для Designjet T620 Series

Бренды по названию

Популярные бренды