Power
Supported power range
Nominal
110-240 VAC, single phase
In-rush current
60A maximum, peak
Input frequency range
47-63 Hz
Power Supplies
Two power supplies
included with each director
Output voltages (each): 48V at 20 amps
12V at 4 amps
Maximum output power: 2000 watts
AC inrush current:
20A maximum, peak
Power Cables
The DC SAN Directors come
with:
two 220V US power cords
2 C19-C20 220V PDU jumpers.
Certified maximum
Please Refer to SAN Design Guide at the following URL:
http://www.hp.com/go/sandesignguide
.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
QuickSpecs
HP SN8000B and DC SAN Director Family
Technical Specifications
DA - 12993 Worldwide — Version 39 — December 20, 2013
Page 34
