10. Press the reset button (2,
Figure 8 (page 34)
) on the management module to activate the IP
address.
Upon reset, the WOCP login window opens. Continue with
“Verifying installation on the
management module” (page 35)
.
Verifying installation on the management module
To verify that the management module software was upgraded successfully:
1.
On the WOCP login window, log in as an HP EVA administrator (user name
admin
and the
password).
NOTE:
If set before the upgrade, the password is maintained during the upgrade process.
The WOCP GUI appears.
2.
Click
View detailed system information
and verify the operation state, XCS version, and
management module software version.
To verify that HP P6000 Command View was upgraded successfully:
1.
Open a browser and navigate to HP P6000 Command View:
https://array IP address:2372
2.
Log in using the same user name and password that you use for the WOCP login.
3.
Verify that the correct time is set:
a.
On the Initialized Storage System Properties window, select
System Options
.
b.
Select
Set time options
.
c.
Verify that the time displayed in the
Current system time
box is correct. If it is incorrect,
enter the correct time and save your changes.
Upgrading browsers and JRE
Estimated time to complete:
10–20 minutes
When to perform:
Anytime before the upgrade
Ensure that you are using a supported browser and JRE. HP P6000 Command View may not work
correctly with an unsupported browser.
The JRE is not used by HP P6000 Command View, but is required for HP P6000 Replication
Solutions Manager, WEBES, and SAN Visibility. See
“Upgrading HP P6000 Replication Solutions
Manager (optional)” (page 36)
for more information.
For information on supported browsers, see Table 5.0, Browser support, in the HP P6000 Enterprise
Virtual Array Compatibility Reference. See
“Reference documentation” (page 6)
for the link to
this document.
NOTE:
If you need to update the browser on remote computers, do so after you have upgraded
HP P6000 Command View.
HP Insight Remote Support software
HP strongly recommends that you install HP Insight Remote Support software to complete the
installation or upgrade of your product and to enable enhanced delivery of your HP Warranty,
HP Care Pack Service or HP contractual support agreement. HP Insight Remote Support supplements
your monitoring, 24x7 to ensure maximum system availability by providing intelligent event
diagnosis, and automatic, secure submission of hardware event notifications to HP, which will
initiate a fast and accurate resolution, based on your product’s service level. Notifications may be
Upgrading browsers and JRE
35