HP Compaq Presario,Presario 4400 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 77

HP Compaq Presario,Presario 4400 Скачать руководство пользователя страница 30

is set to 3c (60 seconds), the Microsoft Windows default.

If the registry entry does not exist, you must create it. See your Windows documentation for
instructions.

If this registry entry is created or changed, reboot the Windows system for the new timeout value
to take effect.

OpenVMS

The maximum LUN timeout value is 120 seconds.

NOTE:

OpenVMS tolerates the controller reboot that occurs at the end of the controller software

upgrade process. Disks on the controller display the Mount Verify status during the controller reboot
but return to Mounted status and resume I/O operations when the controller reboot is complete.
You do not need to change any OpenVMS default settings when performing an online controller
software upgrade.

Online controller software upgrades are supported in OpenVMS cluster environments where the
array is the cluster boot device.

Solaris

Solaris supports online controller software upgrades with the following driver timeouts:

•

Sun drivers (qlc or emlxs): 60 seconds

•

QLogic (qla2300): 60 seconds

•

Emulex (lpfc): 60 seconds

Checking or changing timeouts

For Sun drivers, add the following lines to the

/etc/system

file:

set sd:sd_io_time=60
set ssd:ssd_io_time=60

For the QLogic driver, edit the

/kernel/drv/qla2300.conf

file and change the

hbax-link-down-timeout

value to 60:

hba0-link-down-timeout=60;

For the Emulex driver, edit the

/kernel/drv/lpfc.conf

file and change the

linkdown-tmo

value to 60:

linkdown-tmo=60;

VMware

VMware ESX (Hypervisor) does not time I/O for a guest operating system. Therefore the SCSI
timeouts on commands issued by each VMware guest (Linux, Windows, Solaris) are the timeouts
set for these systems.

Xen Citrix

For Xen Citrix, (except for NFS SR timeouts because Citrix XenServer 5.0 mounts using software
with nondefault timeout values) use the values described in

“Linux Red Hat and SUSE” (page 28)

.

To check or set Xen Citrix parameters, use the

set_parm

executable located in the

/opt/hp/<driver>

directory. When executed, the options to change timeout values are displayed.

30

Preparing for the upgrade

«
...
28
29
30
31
32
...
»

Содержание Compaq Presario,Presario 4400














































































Отзывы:

Нет отзывов