HP Compaq Presario,Presario 4400 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 77

HP Compaq Presario,Presario 4400 Скачать руководство пользователя страница 34

1.

Connect a server with a CD drive to the management module port (1,

Figure 8 (page 34)

) on

the controller enclosure.

Figure 8 Management module

2.

Insert the installation CD into the drive.

3.

Open a browser and navigate to the P6000 WOCP (Web-based Operator Control Panel):

https://HP array IP address:2373

NOTE:

•

If you are running a version of management module software earlier than 0001.1000
(which corresponds to XCS 09004000 or earlier), use port 2372.

•

If you have not previously set the IP address for the management module, the default is
192.168.0.1.

•

If you have not previously completed the initial setup for the management module, see
“Connecting to the management module (initial setup)” in the HP P6000 Web-based
Operator Control Panel User Guide.

The WOCP login window appears.

4.

Log in as an HP EVA administrator (user name

admin

and the password).

The WOCP GUI appears.

5.

In the navigation pane, select

Update management module firmware

.

The Update Management Module Firmware window opens.

6.

Click

Browse

and browse to the installation CD.

7.

Select the

ABM.pkg

file and click

Next step

.

8.

Follow the online instructions and click

Finish

.

A confirmation window opens.

9.

Click

OK

.

The Management Module Restart in Progress window opens. The image files are loaded. This
step can take several minutes.

IMPORTANT:

The management module will restart upon completion of the update. Allow

up to 15 minutes to re-establish a browser connection. Do not reseat, restart, or reset the
management module during this time if you are unable to reconnect from your browser.

After the management module restarts, it may exhibit slow response time for about 5 to 10
minutes while gathering array information and completing background processes.

Upon completion of the upgrade and restart, one of the following occurs:

•

The WOCP login window opens. Continue with

“Verifying installation on the management

module” (page 35)

.

•

The WOCP login window fails to open, which occurs if you are using the default IP
address (192.168.0.1) for the management module. Continue with

Step 10

.

34

Preparing for the upgrade

«
...
32
33
34
35
36
...
»

Содержание Compaq Presario,Presario 4400














































































Отзывы:

Нет отзывов