HP Colorado 5GB, Руководство по установке

Страница: 32 / 48

32
Installation Guide
Removing a Tape
1. Wait until the light on the front of your tape drive quits blinking. (DO
NOT remove a tape during an operation. See the CAUTION note below.)
2. Steady the drive with one hand and grasp the tape cartridge with the
other. Pull the cartridge straight out.
CAUTION: Interfering with a tape during operations may cause data loss, and
may make the tape temporarily unrecordable. If, during a backup, you pull the
tape out of the drive, turn off the power to the computer, or firmly bump the
tape, you will not be able to read the data currently written to the tape. Also,
the tape will not be recordable until it is erased with Colorado Backup’s Erase
utility. (Never use a magnetic bulk eraser to erase your 5GB tapes. Bulk erasers
remove reference points on the tape that are vital. Removing these points makes
tapes unusable.)
Caring for Your Tape Drive
You do not need to perform any routine maintenance on the HP
Colorado 5GB tape drive.
CAUTION: Do NOT clean the read/write head of an HP Colorado 5GB tape
drive.
CAUTION: Do NOT degauss or demagnetize the read/write head of an HP
Colorado 5GB tape drive. Damage to your tape drive will result.