HP Colorado 5GB, Руководство по установке

Страница: 10 / 48

10
Installation Guide
Install Colorado Backup for Your Operating System
Your parallel-port tape drive can easily be shared among computers using
different operating systems. Changing the drive between computers is as
easy as attaching it to the parallel port and starting Colorado Backup. The
Colorado Backup software installation CD includes the files for installing
the backup software for DOS, Windows, and Windows 95. Your tape
drive can also be configured to work with Windows NT 4.0. Select the
environment you work in and turn to the appropriate section for
installation instructions:
■
DOS—page 10
■
Windows—page 15
■
Windows 95—page 21
■
Windows NT 4.0—page 25
NOTE: If your computer has a power-management feature that shuts off your
computer after a specified period of time since the last keyboard input, you may
experience problems with certain operations that exceed the time limit. Turn off
the power-management feature when performing a long running operation such
as a total or full-system backup. Check your computer’s manuals to find out
how to turn off or change the time limit of the power-management feature.
Installing Colorado Backup for DOS
NOTE: Do not install Colorado Backup for DOS for use in Windows 95. This
application does not support Windows 95 conventions such as long filenames
and backups of the registry. See “Installing Colorado Backup for Windows 95”
on page 21.
1. Attach the tape drive to your parallel port as described in “Connecting
the Hardware” on page 2. The drive must be attached to install and
configure the software.
2. Insert the software installation CD into your CD-ROM drive. If your
computer does not have a CD-ROM, see page 33.
3. At the DOS prompt, type
D:\SETUP
and press ENTER (where D: is your
CD-ROM’s drive letter).