26
Installation Guide
G:\TW\Lori\Raptor\C4386-90100\c4386-90100.fm5 Page 26
Last Modified: Tuesday, January 27, 1998 8:17 pm
Printing date: Saturday, April 04, 1998
13. Refer to the printout from the Install Assistant program (see page 13) and
set each field as instructed, then click on
OK.
■
I/O base address
—A location in the computer’s address space used by
the IDE controller to communicate between software and hardware
devices.
■
IRQ
—The Interrupt Request (IRQ) channel is used by the IDE
controller to indicate to the computer that the drive is ready to send
or receive information.
■
Master/Slave —
Two devices can be attached to each IDE controller,
one device set to “Master” and one device set to “Slave.”
14. The Boot Drive dialog box appears prompting you for the drive from
which your computer boots (starts). Make sure the correct drive letter is
entered and click on
OK
.
15. A dialog box appears indicating that the software installation was
successful and that you must exit Windows and reboot your computer to
complete the configuration process. Click on
OK.
16. Exit Windows and, from the DOS prompt, reboot your computer by
pressing
CTRL+ALT+DELETE.
17. Start Windows and double-click on the
Backup
icon in the new
Colorado Backup group.
The following dialog box appears:
Note the instructions for
scheduling an automatic
system backup.
Содержание Colorado 5GB C4354A
Страница 53: ...Technical Information 53 ...