HP Colorado 5GB C4354A, Руководство по установке

Страница: 20 / 56

20
Installation Guide
G:\TW\Lori\Raptor\C4386-90100\c4386-90100.fm5 Page 20
Last Modified: Tuesday, January 27, 1998 8:17 pm
Printing date: Saturday, April 04, 1998
9. Highlight IDE and select OK .
The following screen appears:
10. Refer to the printout from the Install Assistant program (see page 13) and
set each field as instructed, then press
ENTER
.
■
Interrupt —The Interrupt Request (IRQ) channel is used by the IDE
controller to indicate to the computer that the drive is ready to send
or receive information.
■
I/O Base Address —A location in the computer’s address space used
by the IDE controller to communicate between software and
hardware devices.
■
Drive Jumper Setting— Two devices can be attached to each IDE
controller, one device set to “Master” and one device set to “Slave.”
The following screen appears:
11. If you want to be able to schedule backups to start automatically while
you are away from your computer, press the spacebar to mark the check
box. If you want to save the additional hard drive space required for this
feature or do not wish to do unattended backups, leave the check box
empty. Select
OK .
The Colorado Backup files are then copied to your hard drive.
Use the
RIGHT-
ARROW
and
LEFT-
ARROW
keys to
highlight the
value to select.
Press
TAB
to move to
the next field.
When finished, select
OK to accept all the
displayed settings.