HP CL2100 G3 407S, Руководство пользователя и по обслуживанию

Страница: 57 / 116

Configuration 57
9.
Select Proceed with flash update. Flash update automatically runs.
10.
Wait until <Program new data> completes, and then press Enter to shut down the system.
If the signature of FV_MAIN area is invalid, the BIOS automatically enters recovery mode; if this occurs,
only perform steps 5 through 10.
After recovery completes, if the recovery jumper forces the BIOS recovery turn off the system, and then
restore the jumper to its normal position.
BIOS jumpers
This section provides information about the BIOS. See the following table to locate the BIOS maintenance
jumpers.
Jumper Description Jumper Adjustment
J12
PASSWORD CLEAR 1-2 (Default): Normal operation
2-3: Password clear
J11
CMOS CLEAR 1-2 (Default): Normal RTC reset
2-3: Clear RTC registers
J19
MEFIRMWARE
RECOVER 1-2 (Default): Normal operation
2-3: Force ME to enter recovery default
J17
BIOS RECOVERY
MODE 1-2 (Default): Normal operation
2-3: Force BIOS to enter recovery mode
J21
ME
MANUFACTURING
MODE 1-2: ME Flash Override (used for ME entire update)
2-3 (Default):Normal