HP Brio BA410, Дополнительное руководство, Страница: 20 / 123

English 7
2 Running e-Diagtools
Running e-Diagtools from the Utility Partition on your Hard Disk
Press <F10> to enter HP Utility Partition ...
or any other key to proceed
3 Press the <
F10
> key. The following boot menu appears:
NOTE If this does not work, it probably means that the Utility Partition has
been disabled. Try running e-Diagtools from a CD-ROM instead (refer
to "Running e-Diagtools from a CD-ROM", on page 10).
Alternatively, you can recreate the Utility Partition and restore your
operating system. For more information, refer to the Web address:
http://www.hp.com/desktops/diagtools
4 Select the desired option. Depending on your BIOS configuration,
you may have to reboot the PC. Changes are made automatically and
are restored to the original values when you exit e-Diagtools.
NOTE You cannot move from one option to another. Once you have selected
an option, to chose another you must exit, reboot your system and run
e-Diagtools.
Help
Gives a brief explanation of menu options.
BIOS Update
Checks for a BIOS update and, if available, installs it on your system.
For more information on how to configure e-Diagtools to update the
BIOS refer to "Setting up the e-Support Features", on page 13.