HP Brio BA200, Руководство пользователя

Страница: 86 / 96

80
Clearing Your PC’s CMOS (BIOS) Settings
Manually Clearing CMOS and Passwords
1 Remove the PC’s cover. Refer to page 46.
2 Locate the CMOS jumper (J-6) on the system board. You may need to remove the
PC’s side panel to gain easier access to the jumper block page 48.
3 To clear both CMOS and password, set the Clear CMOS jumper (J-6) so that it
covers the two pins on the opposite end of the jumper block.
If you want to clear passwords only, locate the Clear password jumper (J-8) and set
the jumper so that it covers the two pins on the opposite end of the jumper block.
Replace the cover, reconnect the power cord, reboot your PC, then shut down your
system before proceeding with step 4.
4 Reset the jumper to the default position.
5 Replace the cover and reconnect the power cord.
6 Switch on the PC.
7 Press
F2
to enter the
Setup
program. The PC will restart with the new
configuration. You now have full access to the Setup program. For more
information on
Setup , refer to page 22.
C
C C
Clllleeeeaaaarrrr C
C C
CM
M M
MO
O O
OS
SS
S aaaan
n n
nd
d d
d P
PP
Pa
aa
assssssssw
w w
wod
od od
odssss ((((JJJJ----6
6 6
6))))
Default Position
Clear CMOS
Clear CMOS and Passwords
Jumper Block (J-6)
Clear Passwords
Jumper Block (J-8)
C
C C
Clllleeeeaaaarrrr P
PP
Pa
aa
ass
ss ss
ssw
w w
wo
o o
orrrrd
d d
dssss o
o o
on
n n
nlllly
yy
y ((((JJJJ----8
88
8))))
Default Position
Clear Passwords
BrioGuide.book Page 80 Wednesday, September 1, 1999 2:37 PM