HP BladeSystem bc2200 - Blade PC, Справочное руководство

Страница: 57 / 79

NOTE: If the enclosure does not restart, proceed to Table 7-1 Enclosure diagnostic steps
on page 51 in this appendix.
10. Be sure that connectors and components are seated properly. Refer to the “General Loose
Connections” section in the
Servers Troubleshooting Guide on the Documentation CD that ships
with your enclosure.
Enclosure diagnostic steps
If your enclosure does not function properly, use Table 7-1 Enclosure diagnostic steps on page 51
to determine appropriate actions based on the symptoms observed. Start with question 1 and work
your way through the table in order to narrow down possible causes and identify actions or solutions.
According to the answers you give to the questions in Table 7-1 Enclosure diagnostic steps
on page 51 , you are directed to the appropriate table in the section that immediately follows. That
table outlines possible reasons for the problem, options available to assist in diagnosis, and possible
solutions.
Table 7-1 Enclosure diagnostic steps
Question Answer
Question 1: Is the power LED on both power supplies solid
green? If yes, continue to Question 2 of this table.
If no, see Table 7-2 Is the Power LED on Both Power
Supplies Solid Green? on page 52
Question 2: Is the fault LED on both power supplies off? If yes, continue to Question 3 of this table.
If no, see Table 7-3 Is the Fault LED on Both Power Supplies
Off? on page 52
Question 3: Is the enclosure power LED on the rear panel
green? If yes, continue to Question 4 of this table.
If no, see Table 7-4 Is the Enclosure Power LED on the Rear
Panel Green? on page 54
Question 4: Is the enclosure health LED on the front of the
enclosure on? If yes, continue to Question 5 of this table.
If no, see Table 7-5 Is the Enclosure Health LED on the
Front of the Enclosure On? on page 54
Question 5: Is the local management console displaying
information when connected to the enclosure? If yes, use the displayed information for further diagnosis.
If no, see Table 7-6 Is the Local Management Console
Displaying Information When Connected to the Enclosure?
on page 55
or continue to Question 6.
Question 6: Is the Integrated Administrator health LED
green? If yes, continue to Question 7 of this table.
If no, see Table 7-7 Is the Integrated Administrator Health
LED Green? on page 55
Question 7: Is the fan health LED green? If yes, and you are still unable to access the local console,
contact HP or your authorized service provider for parts and
service.
If no, see Table 7-8 Is the Fan Health LED Green?
on page 56
Enclosure diagnostic steps 51