HP BL680c - ProLiant - G5, Руководство пользователя

Страница: 69 / 111

5. From the Filter list, select External .
6. Select the external addresses to be reclaimed.
7. Click Reclaim External . You are prompted to confirm your choices.
8. Click OK .
Adding custom MAC address ranges
Because the maximum range size is 131,072, a large range might take a few minutes to create. You can
create one custom range.
To add custom MAC address ranges:
1. From the VCEM home page, under the Administration heading, click the
MAC addresses
hyperlink.
2. From the Select ranges to configure list, select
MAC
.
3. Click
Add custom
. The Add Custom MAC Address Range information appears.
4. Enter custom MAC address range.
5. Click
OK
.
Editing custom MAC address ranges
Because the maximum range size is 131,072, a large range might take a few minutes to edit. If you are
reducing the size of a custom range, verify that any addresses or exclusion ranges already in use are not
outside the edited range.
To edit custom MAC address ranges:
1. From the VCEM home page, under the Administration heading, click the
MAC addresses
hyperlink
under the Administration heading.
2. From the Select ranges to configure list, select
MAC
.
3. Select the custom MAC address range.
4. Click
Edit
.
5. Edit the custom MAC address range as necessary.
6. Click
OK
.
Removing custom MAC address ranges
NOTE: Removing a custom MAC address range also removes its defined exclusion ranges.
You must verify there are no addresses already in use for this range. To remove custom MAC address ranges:
1. From the Virtual Connect Enterprise Manager home page, under the Administration heading, click the
MAC addresses
hyperlink.
2. From the Select ranges to configure list, select
MAC
.
3. Select the custom MAC address range.
4. Click
Delete
. You are prompted to confirm your choice.
5. Click
OK
.
WWN Addresses
NOTE: In VCEM 1.40 and later, a new “VCEM-defined” range has been reserved, from which VCEM
allocates WWN addresses. VCEM no longer uses the “HP Pre-defined” range for WWN address allocation.
However, profiles created before VCEM 1.40 will continue to use the HP Pre-defined addresses already
assigned to them.
The WWN range used by the VCEM domain must be unique within the environment. HP provides a set of
predefined addresses that is reserved for Virtual Connect and VCEM and does not conflict with server
factory-default WWNs.
Overall, WWN range management in VCEM is very similar to MAC ranges. VCEM allocates WWNs
automatically according to VC Domain Group configuration using HP-predefined, VCEM-defined, or
WWN Addresses 69