HP BL25p - ProLiant - 1 GB RAM, Руководство пользователя

Страница: 80 / 118

80 HP ProLiant BL25p Server Blade User Guide
•
•
Check any interlock or interconnect LEDs that may indicate a component is
not connected properly.
If problems continue to occur, remove and reinstall each device, checking the
connectors and sockets for bent pins or other damage.
Diagnostic Steps
To effectively troubleshoot a problem, HP recommends that you start with the
first flowchart in this section, "Start Diagnosis Flowchart (on page
80 )," and
follow the appropriate diagnostic path. If the other flowcharts do not provide a
troubleshooting solution, follow the diagnostic steps in "General Diagnosis
Flowchart (on page
83 )." The General Diagnosis flowchart is a generic
troubleshooting process to be used when the problem is not server-specific or is
not easily categorized into the other flowcharts.
The available flowcharts include:
•
Start Diagnosis Flowchart (on page 80 )
•
General Diagnosis Flowchart (on page 83 )
•
Power-On Problems Flowchart ("Server Blade Power-On Problems
Flowchart" on page
85 )
•
POST Problems Flowchart (on page 87 )
•
OS Boot Problems Flowchart (on page 89 )
•
Server Fault Indications Flowchart (on page 92 )
The number contained in parentheses in the flowchart boxes corresponds to a
table with references to other detailed documents or troubleshooting instructions.
Start Diagnosis Flowchart
Use the following flowchart to start the diagnostic process.
Item Refer to
1 "General Diagnosis Flowchart (on page 83 )"