manualshive.com logo in svg

HP BL20p - ProLiant - G2, Руководство по установке и настройке, Страница: 76 / 117

Поделиться
Скачать
HP BL20p - ProLiant - G2 Скачать руководство пользователя страница 76

Regulatory Compliance Notices 

A-4

 

HP ProLiant BL p-Class System Setup and Installation Guide 

  

HP CONFIDENTIAL

 

Writer: Christine Portillo File Name: f-appa Regulatory Compliance Notices.doc 

Codename: ICE Part Number: 230852-002 Last Saved On: 11/20/02 4:58 PM 

Battery Replacement Notice 

Your computer is provided with an internal lithium battery or battery pack. There is a 
danger of explosion and risk of personal injury if the battery is incorrectly replaced or 
mistreated. Replacement is to be done by an HP authorized service provider using the 
HP spare designated for this product. 

For more information about battery replacement or proper disposal, contact an 
HP authorized reseller or an authorized service provider. 

 

 

WARNING:  Your computer contains an internal lithium manganese dioxide, a 
vanadium pentoxide, or an alkaline

 

battery pack. There is risk of fire and burns 

if the battery pack is not handled properly. To reduce the risk of personal 
injury: 

• 

Do not attempt to recharge the battery. 

• 

Do not expose to temperatures higher than 60°C. 

• 

Do not disassemble, crush, puncture, short external contacts, or dispose of 
in fire or water. 

• 

Replace only with the HP spare parts designated for this product. 

 

 

Batteries, battery packs, and accumulators should not be disposed of 
together with the general household waste. To forward them to recycling or 
proper disposal, please use the public collection system or return them to HP, 
authorized HP Partners, or their agents. 

 

Содержание BL20p - ProLiant - G2






















































































































Отзывы:

Нет отзывов