HP BACKCOPY Скачать руководство пользователя

Страница: 259 / 303

Cause.

The first I/O operation attempted on a tape encountered a file-system error.

Effect.

BACKUP rewinds and unloads the tape and prompts for a tape.

Recovery.

For corrective action for the error number

, see the Guardian Procedure Errors and

Messages Manual.

8120

Labeled tape mounted for input is a scratch tape.

Cause.

A tape that has been labeled or relabeled and has no data was mounted for reading.

Effect.

RESTORE rewinds and unloads the tape and prompts for another tape.

Recovery.

Mount the correct tape.

8121

Tape parity errors and/or tape record checksum errors were
found on the beginning volume labels.

Cause.

Parity errors, checksum errors, or both occurred on the beginning volume labels. Parity and

checksum errors might result because the beginning of a tape is worn out or a tape drive is dirty.

Effect.

RESTORE rewinds and unloads the tape and prompts for a tape.

Recovery.

If the drive used has a manual density switch, make sure that it is set to the correct density

and try again. If the problem persists, see the cause and recovery for error

8025 (page 237)

8122

Tape parity error(s) and/or tape record checksum error(s)
occurred on the beginning volume labels. Error recovery was
able to recognize the tape.

Cause.

Parity or checksum errors occurred on some of the beginning volume labels. Parity and

checksum errors might result because the beginning of a tape is worn out or a tape drive is dirty.

Effect.

RESTORE continues. Because duplicate volume labels were written, error recovery was able

to recognize the tape usage of the unaffected volume labels.

Recovery.

After RESTORE is finished, investigate the tape and the tape drive.

8123

An EOF mark was found where begin volume labels were
expected.

Cause.

An invalid tape format was discovered.

Effect.

RESTORE rewinds and unloads the tape and prompts for a tape.

Recovery.

Check the tape and remount it. If the problem persists, see the cause and recovery

sections for error

8025 (page 237)

8126

Attempt to open a labeled tape failed due to error number.
Evaluate the error and remount the same/different tape on the
same/different tape drive.

8120 259

Содержание BACKCOPY
















































































































































































































































































































Результаты поиска

Содержание BACKCOPY

Отзывы:

Похожие инструкции для BACKCOPY

Бренды по названию

Популярные бренды

HP BACKCOPY, Справочное руководство

Результаты поиска

Содержание BACKCOPY

Отзывы:

Похожие инструкции для BACKCOPY

Бренды по названию

Популярные бренды