HP BACKCOPY Скачать руководство пользователя

Страница: 230 / 303

Effect.

RESTORE fails and terminates.

Recovery.

Specify either VOL or MAP NAMES, but not both, and reissue the command.

7810

Only one file renaming option can be specified.

Cause.

The RENAME and MAP NAMES options cannot be used in a single RESTORE command

Effect.

RESTORE fails and terminates.

Recovery.

Specify either RENAME or MAP NAMES, but not both, and reissue the command.

7811

PART/ALTFILE and MAP NAMES options are mutually exclusive.
Must use only one of these.

Cause.

The PART and MAP NAMES options cannot be used in a single RESTORE command, and

the ALTFILE and MAP NAMES options cannot be used in a single RESTORE command.

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the command without the offending option.

7812

Not allowed to specify PARTONLY ON and INDEXES IMPLICIT
together.

Cause.

The PARTONLY ON and INDEXES IMPLICIT options cannot be used in a single RESTORE

command.

Effect.

RESTORE fails and terminates.

Recovery.

Reissue the command without the offending option.

7813

USE CATALOG has already been specified.

Cause.

The CATALOG option was specified more than once in a RESTORE command.

Effect.

RESTORE fails and terminates.

Recovery.

Specify the CATALOG option only once and reissue the command.

7814

START cannot be specified as a qualifier and an option.

Cause.

START can be specified either as a qualifier or as a separate option in a BACKUP or

RESTORE command, but not both.

Effect.

BACKUP or RESTORE fails and terminates.

Recovery.

Specify the START option only once and reissue the command.

230 BACKCOPY, BACKUP, and RESTORE Messages

Содержание BACKCOPY
















































































































































































































































































































Результаты поиска

Содержание BACKCOPY

Отзывы:

Похожие инструкции для BACKCOPY

Бренды по названию

Популярные бренды

HP BACKCOPY, Справочное руководство

Результаты поиска

Содержание BACKCOPY

Отзывы:

Похожие инструкции для BACKCOPY

Бренды по названию

Популярные бренды