7801
The MYID option is not allowed in this copy of RESTORE.
Cause.
This older version of RESTORE does not support the MYID option.
Effect.
RESTORE fails and terminates.
Recovery.
Reissue the command without the MYID option or use a later version of RESTORE.
7802
Bad tape mode name. Expecting STARTSTOP or STREAM.
Cause.
An invalid TAPEMODE specification was used in the BACKUP command.
Effect.
BACKUP fails and terminates.
Recovery.
Specify either STARTSTOP or STREAM with the TAPEMODE option and reissue the
BACKUP command.
7803
Not allowed to specify DENSITY more than once.
Cause.
The DENSITY option was specified two or more times in the BACKUP command.
Effect.
BACKUP fails and terminates.
Recovery.
Specify the DENSITY option only once and reissue the command.
7807
Expecting either ON or OFF or nothing (the default is ON).
Cause.
An incorrect parameter was specified for a RESTORE command option.
Effect.
RESTORE fails and terminates.
Recovery.
Specify either ON, OFF, or no parameter for the option and reissue the RESTORE
command. Specifying no parameter is the same as specifying ON.
7808
Expecting either EXPLICIT or IMPLICIT.
Cause.
An invalid parameter for the INDEXES option was specified in the BACKUP/RESTORE
command.
Effect.
BACKUP/RESTORE fails and terminates.
Recovery.
Specify either EXPLICIT or IMPLICIT with the INDEXES option and reissue the command.
7809
VOL and MAP NAMES options are mutually exclusive. Must use
only one of these.
Cause.
The VOL and MAP NAMES options cannot be used in a single RESTORE command.
7801 229
Содержание BACKCOPY
Страница 113: ...Format of the Permanent Work File 1 13 ...
Страница 114: ...1 14 Disk Space Analysis Program DSAP ...