HP AX691B Скачать руководство пользователя страница 86

Страница: 86 / 96

Component identification 86

SAS and SATA hard drive LEDs

Item

Description

Fault/UID LED (amber/blue)

Online LED (green)

SAS and SATA hard drive LED combinations

Online/activity
LED (green)

Fault/UID LED
(amber/blue)

Interpretation

On, off, or
flashing

Alternating amber
and blue

The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a

management application.

On, off, or

flashing

Steadily blue

The drive is operating normally, and it has been selected by a

management application.

Amber, flashing

regularly (1 Hz)

A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.

Off

The drive is online, but it is not active currently.

Flashing
regularly (1 Hz)

Amber, flashing
regularly (1 Hz)

Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.

The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has

been received for this drive. To minimize the risk of data loss,
do not replace the drive until the expansion or migration is
complete.

Flashing
regularly (1 Hz)

Off

Do not remove the drive. Removing a drive may terminate the
current operation and cause data loss.

The drive is rebuilding, or it is part of an array that is

undergoing capacity expansion or stripe migration.

Flashing

irregularly

Amber, flashing

regularly (1 Hz)

The drive is active, but a predictive failure alert has been

received for this drive. Replace the drive as soon as possible.

Содержание AX691B

































































































Результаты поиска

Содержание AX691B

Отзывы:

Похожие инструкции для AX691B

Бренды по названию

Популярные бренды

HP AX691B, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание AX691B

Отзывы:

Похожие инструкции для AX691B

Бренды по названию

Популярные бренды