HP AX691B Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 96

background image

Diagnostic tools 72

HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the installation or
upgrade of your product and to enable enhanced delivery of your HP Warranty, HP Care Pack Service or

HP contractual support agreement. HP Insight Remote Support supplements your monitoring, 24 x 7 to
ensure maximum system availability by providing intelligent event diagnosis, and automatic, secure
submission of hardware event notifications to HP, which will initiate a fast and accurate resolution, based

on your product’s service level. Notifications may be sent to your authorized HP Channel Partner for on-
site service, if configured and available in your country. The software is available in two variants:

•

HP Insight Remote Support Standard: This software supports server and storage devices and is

optimized for environments with 1–50 servers. Ideal for customers who can benefit from proactive
notification, but do not need proactive service delivery and integration with a management platform.

•

HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and
proactive service support for nearly all HP servers, storage, network, and SAN environments, plus

selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems
Insight Manager. A dedicated server is recommended to host both HP Systems Insight Manager and

HP Insight Remote Support Advanced.

Details for both versions are available on the HP website (

http://www.hp.com/go/insightremotesupport

).

To download the software for free, go to Software Depot (

http://www.software.hp.com

).

Select

Insight Remote Support

from the menu on the right.

USB support and functionality

USB support

HP provides both standard USB 2.0 support and legacy USB 2.0 support. Standard support is provided
by the OS through the appropriate USB device drivers. Before the OS loads, HP provides support for USB

devices through legacy USB support, which is enabled by default in the system ROM.
Legacy USB support provides USB functionality in environments where USB support is not available

normally. Specifically, HP provides legacy USB functionality for the following:

•

POST

•

RBSU

•

Diagnostics

•

DOS

•

Operating environments which do not provide native USB support

Internal USB functionality

An internal USB connector is available for use with security key devices and USB drive keys. This solution
provides for use of a permanent USB key installed in the internal connector, avoiding issues of clearance

on the front of the rack and physical access to secure data.

«
...
70
71
72
73
74
...
»

Содержание AX691B

































































































Отзывы:

Нет отзывов

Похожие инструкции для AX691B

Express 5800 Series

Бренд: NEC Страницы: 90

PDS-220F Series

Бренд: ICP DAS USA Страницы: 94

Бренд: 360 Systems Страницы: 8

digitalSTROM-Server

Бренд: aizo Страницы: 2

NOP1840 PEP-Box

Бренд: Newtec Страницы: 96

Vlinx VESR4 4 Series

Бренд: B&B Electronics Страницы: 70

EDIMAX FAST ETHERNET MFP SERVER VERSION: 2.0

Бренд: Edimax Страницы: 118

SuperServer 1029U-T Series

Бренд: Supermicro Страницы: 1

DOMINION KSX II

Бренд: Raritan Страницы: 362

BizNAS D400 Series

Бренд: Tandberg Data Страницы: 2

Бренд: High End Systems Страницы: 224

NovaScale T860 F2

Бренд: Bull Страницы: 36

Бренд: Axis Страницы: 10

ASR-3100PP-R11A1E

Бренд: Advantech Страницы: 86

Бренд: Advantech Страницы: 110

Бренд: AirLive Страницы: 89

Бренд: Inspur Страницы: 147

Бренд: Oracle Страницы: 188

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды