step 4.
Access the appliance's web interface and click Install Upgrade (under General on the menu).
2.
On the Install Upgrade page, type the complete path to the firmware image on the local hard drive
(for example, "C:\TEMP\UPGRADE.HP") or click Browse to find the firmware image
downloaded in step 2.
3.
Click Install Upgrade to upload the file to the appliance.
4.
Restart the appliance immediately by selecting
Restart Appliance
under General on the menu. The
restart process takes several minutes. During this time, ensure that power is not removed from the
appliance. On the appliance's front panel, a series of messages will appear, including "Shutdown in
progress ... Booting ... Configuring ... Verifying ... Validating ... Uncompressing ... Extracting ..."
and so on. The standard display will appear when the appliance has been restarted.
5.
When the appliance is ready to function, re-enter the network address if necessary. If no errors
occur during the upgrade process, this is not necessary. All configuration information is retained.
6.
System Messages for Upgrading the Firmware
Backing Up, Restoring, Resetting, Rebooting, and Upgrading the Appliance
http://albatross.rose.hp.com/~lindsay/pdfs/english/backup.htm (4 of 4) [6/22/2001 11:25:58 AM]