HP All-in-One 200-5000 - Desktop PC, Быстрый старт

Страница: 18 / 60

Symptom Possible solution
No sound is
produced. For Windows 7:
1. Click the Start button, click Control Panel , click Action Center , and then click
Troubleshooting .
2. Under Hardware and Sound , click Troubleshoot and audio playback .
If you use an HDMI connector on the graphics card (select models only) to connect your
monitor to the computer, you should also connect analog speakers to the computer Audio Line
Out connector if you want to hear sound during the initial setup of the computer. Refer to the
Setup Poster to connect analog speakers.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to adjust
volume. Use the front-panel buttons to enter the onscreen display (OSD) and ensure that audio
is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the speakers
are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Internet access
Symptom Possible solution
Internet programs
do not start
automatically. Log in to your ISP, and start the desired program.
I cannot connect to
the Internet. For Windows 7:
1. Click the Start button, click Control Panel , click Action Center , and then click
Troubleshooting .
2. Under Network and Internet , click Connect to the Internet .
ENWW
Internet access
11