manualshive.com logo in svg

HP Adaptive Rack Cooling System, Руководство по установке системы, Страница: 3 / 50

Поделиться
Скачать
HP Adaptive Rack Cooling System Скачать руководство пользователя страница 3

Contents

About this guide......................................................................................4

Optimum environment and site preparation..................................................................................4
Safety information......................................................................................................................... 4

Installation............................................................................................... 5

Accessory and option kit contents................................................................................................ 5
Required tools............................................................................................................................. 11
Installing the HPE Adaptive Rack Cooling System..................................................................... 12

Configuration.........................................................................................16

Configuring the unit ....................................................................................................................16
Baying the racks together........................................................................................................... 18
Integrating the HPE Adaptive Rack Cooling System and IT Rack .............................................20

HPE Adaptive Rack Cooling System pressure tube connections ................................... 20
Installing the pressure sampling tubes.............................................................................21

Installing the side panel blanks on the IT racks.......................................................................... 25

Installing side panel blanks on a 42U IT rack...................................................................26
Installing side panel blanks on a 48U IT rack...................................................................28

Installing the HPE ARCS Auto Door Release Kit and HPE ARCS Auto Door Controller Kit...... 30
Installing the 6U Facade............................................................................................................. 38
Connecting to the facility water................................................................................................... 40

Websites................................................................................................ 47

Support and other resources...............................................................48

Accessing Hewlett Packard Enterprise Support......................................................................... 48
Accessing updates......................................................................................................................48
Customer self repair....................................................................................................................49
Remote support.......................................................................................................................... 49
Warranty information...................................................................................................................49
Regulatory information................................................................................................................50
Documentation feedback............................................................................................................ 50

3

Содержание Adaptive Rack Cooling System



















































Отзывы:

Нет отзывов